Showing all 12 results

Mask RC 4 P3

RC4 is a filter respirator with hood for the protection of the face and of the breathing pathways from splinters, fumes, dusts, sand blasting particles. It can be used in dusty environments such as foundries, quarries or during drilling, grinding, polishing or light sandblasting. Light and very strong, easy to wear and use RC4 protects the operator head down to the shoulders thanks to the very strong protective hood. The RC4 shall be used in combination with filter 100 LD P3 (to be ordered separately – see specific data sheet) eventually equipped with dedicated pre-filters. The respirators is provided with wide safety visor made of an external replaceable plain glass visor and an internal polycarbonate safety visor.

  • Half-face blank: Moulded rubber
  • Standardized connectors: Shock & Solvent resistant plastic
  • Head straps: Elasticized webbing
  • Nape rest: Moulded polyethylene
  • Exhalation valve: Rubber membrane mounted on a plastic shock and solvent resistant
  • External visor: Plain glass
  • Internal visor: Polycarbonate
  • Front part of the hood: Flower leather
  • Back part of the hood: Strong cotton fabric
  • Store at temperatures between -20 and +50 °C and with RH <80%.
  • Weight :720 g approx. without filter
  • EN 140:1998

Mask DUETTA

DUETTA is an ideal face piece for use in paint and pesticide spraying and in the handling of chemical products. Thanks to a soft sealing flap, it seats comfortably on the face, whilst the rigid shell firmly holds the cartridges and evenly distributes their weight. DUETTA together with Spasciani snap-in cartridges series 2000 is the best value respirator. Filtering cartridges can moreover hold special pre-filters that preserve the particle filter element from a too fast clogging up when used in particularly dusty environments.

    • Half-face blank: Composite plastic material
    • Head straps: Elasticized webbing
    • Nape rest: Nylon
    • Exhalation valve: Rubber
    • Snap-in connectors: Shock & solvent resistant plastic
    • Store at temperatures between -20 and +50 °C and with RH <80%.
    • Weight: 65gr
    • EN 140:1998

 

Mask Duo

DUO is a professional, durable and decontaminable face piece ideal for handling dangerous chemical substances,
toxic gases, solvents and dusts and for spray painting. DUO is suitable for use in chemical and pharmaceutical companies, in agriculture and in ore milling. DUO must be used in combination with its own snap-in cartridges Spasciani series 2000. Filtering cartridges can moreover hold special pre-filters that preserve the particle filter element from a too fast clogging up when used in particularly dusty environments.

  • Half-face blank: TPE
  • Head straps: Elasticized webbing
  • Nape rest: Moulded polyethylene
  • Exhalation valve: Rubber
  • Snap in connectors: Shock & Solvent resistant plastic
  • Store at temperatures between -20 and +50 °C and with RH <80%.
  • Weight: 90 g
  • EN 140:1998

Mask ST 85

ST 85 is a professional, durable and decontaminable facepiece ideal for handling dangerous chemical substances, toxic gases, solvents and dusts and for use in chemical industries. The special anatomical shape of the half mask and the four adjusting buckles allow to wear the mask easily and efficiently and to obtain a perfect and comfortable adaptation of the mask on the user face. ST 85 is provided with a female thread connection to EN 148-1. ST 85 can be used in combination with filters series Blue Line models 100, 200, 201 and with 202 A2P3. The halfmask can also be used in conjunction with a filter holder with shoulder belt and a corrugated hose model Spasciani TUR 60 or 90 for the use of Spasciani screw filter 202, 203 or new 204

  • Half-face blank: EPDM
  • Head straps: Elasticized webbing
  • Nape rest: Moulded polyethylene
  • Exhalation valve type BV 57: Rubber membrane mounted on a plastic base and protected by snap-on
    Pre-chamber cover rubber
  • Standardized connectors: Shock & Solvent resistant plastic
  • Store at temperatures between -20 and +50 °C and with RH <80%
  • WEIGHT: 120 g approx
  • EN 140:1998

Mask TR 2002 With Dupla Adaptor

Full Face Mask, Negative Pressure, with threaded connector to EN 148-1 made of:

  • Face blank with double revert seal, ergonomic and bellows-like
  • Visor, panoramic and wide visibility
  • Group that holds in one single body the exhale membrane, the gasket/valve holder and the exhale membrane
  • Inner nose cup
  • Head harness, five arms
  • Neck strap
  • The mask can be used with: Negative pressure devices provided with the same threaded connector to EN 148-1, such as filters, air lines, PAPRs etc.
  • Face Blank: TPE
  • Visor: Polycarbonate
  • Head harness: EPDM
  • Nose Cup: TPE
  • Neck strap: PVC
  • Weight: 580 gr
  • Store at temperatures between -20 and +50 °C and RH <80%
  • EN 136:1998 Class 2

Mask TR 2002 CL2

Full Face Mask, Negative Pressure, with threaded connector to EN 148-1 made of:

  • Face blank with double revert seal, ergonomic and bellows-like
  • Visor, panoramic and wide visibility
  • Group that holds in one single body the exhale membrane, the gasket/valve holder and the exhale membrane
  • Inner nose cup
  • Head harness, five arms
  • Neck strap
  • The mask can be used with: Negative pressure devices provided with the same threaded connector to EN 148-1, such as filters, air lines, PAPRs etc.
  • Face Blank: TPE
  • Visor: Polycarbonate
  • Head harness: EPDM
  • Nose Cup: TPE
  • Neck strap: PVC
  • Weight: 580 gr
  • Store at temperatures between -20 and +50 °C and RH <80%
  • EN 136 Class 2

Mask TR2002 CL3

Full Face Mask, Negative Pressure, with threaded connector to EN 148-1 made of:

  • Face blank with double revert seal, ergonomic and bellows-like
  • Visor, panoramic and wide visibility
  • Group that holds in one single body the exhale membrane, the gasket/valve holder and the exhale membrane
  • Inner nose cup
  • Head harness, five arms
  • Neck strap
  • The mask can be used with:
  • Negative pressure devices provided with the same threaded connector to EN 148-1, such as filters, air lines, PAPRs etc.
  • Face Blank: EPDM
  • Visor: Polycarbonate scratch and solvent resistant
  • Head harness: EPDM
  • Nose Cup: TPE
  • Neck strap: PVC
  • Store at temperatures between -20 and +50 °C and RH <80%
  • Weight: 630 g
  • EN 136:1998 Class 3

Mask TR 82

Full Face Mask, Negative Pressure, with threaded connector to

    EN 148-1 made of:

  • Moulded face blank
  • Visor, panoramic and wide visibility
  • Group that holds in one single body the connection for the filter or respirator, the exhale membranes, the inhalation membrane and the speech device.
  • Inner nose cup
  • Head harness, five arms
  • Neck strap
  • Face Blank: EPDM
  • Visor: Polycarbonate
  • Head harness: EPDM
  • Nose Cup: TPE
  • Neck strap: PVC
  • Store at temperatures between -20 and +50 °C and RH <80%
  • Weight: 570 g
  • EN 148-1

Mask TR 82 E

Is full face mask equipped with a special system of metal buckles mounted on the helmets of Fire Brigades and Police. The system assures a great stability and tightness of the mask on the face. This system has been specifically designed in order to allow an easy connection between the mask and the helmet and to secure, at the same time, the safe positioning of the mask on the operator’s face, thus avoiding any accidental loss or leakage deriving from any sort of accidental crash. TR 82 E is a Negative Pressure Full Face Mask with threaded connector to EN 148-1. It can be used with negative pressure devices provided with the same threaded connector to EN 148- 1, such as filters, and with compatible helmets.

The TR 82Ε composed by:

  • Moulded face blank
  • Visor, panoramic and wide visibility
  • Group that holds in one single body the connection for the filter or respirator, the exhale membranes, the
    inhalation membrane and the speech device.
  • Inner nose cup
  • Metal buckles for helmet connection
  • Speech device
  • EN 136:1998 Class 3

Mask TR 82 SILICON

Full Face Mask, Negative Pressure, with threaded connector to EN 148-1 made of:

  • Face blank with double revert seal, ergonomic and bellows-like
  • Visor, panoramic and wide visibility
  • Group that holds in one single body the exhale membrane, the gasket/valve holder and the exhale membrane
  • Inner nose cup
  • Head harness, five arms
  • Neck strap

The mask can be used with:

  • Negative pressure devices provided with the same threaded connector to EN 148-1, such as filters, air lines, PAPRs etc.
  • SPASCIANI series 2000 twin cartridges, mounted on the DUPLA adaptor

Materials:

  • Face Blank: Silicone
  • Visor: Polycarbonate scratch and solvent resistant
  • Head harness: EPDM
  • Nose Cup: TPE
  • Neck strap: PVC
  • Store at temperatures between -20 and +50 °C and RH <80%
  • Weight: 630 g (1,39 lb) approximately
  • EN 136:1998 Class 3

Dupla Adaptor

The DUPLA adapter made of nylon allows the connection of two cartridges SPASCIANI series 2000 to the TR2002 mask.